Exceptional Build Quality that Lasts
We take quality seriously here at Dee Zee. It’s kind of our thing. Our Nerf Steps are no exception. These tubular side steps are constructed of 4 inch oval stainless steel and designed to provide a larger stepping surface for secure footing, even in less than ideal conditions.
The design provides a larger stepping surface to ensure safety for everyone who uses it. Molded plastic step pads and a larger stepping surface offer secure footing, even in less than ideal conditions.
Where’s the bracing?
The 4 inch oval Nerf Bars feature hidden sturdy steel bracing to provide a clean styled bar. The mounting brackets are powder coated to help prevent rust and keep the tubes feeling strong and solid.
Don’t worry, you don’t need to drill your baby. The 4” oval stainless steel step bars are custom fitted for each vehicle to eliminate the need for drilling during installation.
4" Oval Nerf Bar Steps Feature:
- Polished Stainless Steel Finish
- Molded Plastic Step Pads
- Powder Coated Steel Braces
- 90 Degree Bends Hide Mounting Braces From View
- Custom Fit Application Ensures Quick and Easy Installation
- No Drilling Required For Installation
- Limited-Lifetime Warranty
AdminDeeZee2 –
They are manufactured overseas. 2020 HD is the same as the 2021.
AdminDeeZee2 –
Yes the nerf bars are sold as pairs.
AdminDeeZee2 –
4″ stainless nerf steps for a 19-20 new Silverado is DZ373517.
AdminDeeZee2 –
Get in contact with customer service for assistance. 800-779-2102
AdminDeeZee2 –
Unfortunately the 4″ tubes come into us already packaged. We do not have them available as singles.
AdminDeeZee2 –
Not sure of the any specific quick fix. Contact customer service, they may have more information. 800-779-2102
AdminDeeZee2 –
They are held in with metal clips with pegs on the bottom of the step pad. Contact customer service for assistance getting replacements. 800-779-2102
AdminDeeZee2 –
Unfortunately no. The rear mounting location will not be there.
AdminDeeZee2 –
Depends on the application. If you look up the instructions for the part number that fits your vehicle it will show the mounting points.
AdminDeeZee2 –
All of our steps fit fine with the factory flaps. There are some that are very close to touching the flap based on where the mounting location is on the truck. You can check the instructions of the particular steps for your application to determine if they will be touching.
AdminDeeZee2 –
Place the following the address in your menu bar. https://www.deezee.com/product/step-pads/
AdminDeeZee2 –
Yes. Get in contact with customer service. 800-779-2102
AdminDeeZee2 –
We do not make them.
AdminDeeZee2 –
Yes it will.
AdminDeeZee2 –
The GM applications for our 3″ and 4″ use the body mounts for installation.
AdminDeeZee2 –
The bars have a 90 degree bend to the body mount. Be sure to see where that body mount lines up with the flaps. It should clear.
AdminDeeZee2 –
You can order them from our website but if you need the threaded inserts, please call customer service for assistance. 800-779-2102
AdminDeeZee2 –
Get in contact with customer service. 800-779-2102
AdminDeeZee2 –
Our steps use the factory locations for mounting our steps.
AdminDeeZee2 –
Yes there is a center mounting bracket.
AdminDeeZee2 –
The are made from 304 stainless steel. Not coated.
AdminDeeZee2 –
Get in contact with customer service. 800-779-2102.
AdminDeeZee2 –
The crew cabs do. It mounts to the middle body mount.
AdminDeeZee2 –
Yes they will.
AdminDeeZee2 –
Yes. Contact customer service at 800-779-2102.
AdminDeeZee2 –
We test fit our product up to 350 lbs.
AdminDeeZee2 –
We don’t have any bracket kit to lower the nerf bars.
AdminDeeZee2 –
Get in contact with customer service for assistance. 800-779-2102
AdminDeeZee2 –
Contact our customer service for assistance. 800-779-2102.
AdminDeeZee2 –
Contact customer service for assistance on getting a replacement pad. 800-779-2102.
AdminDeeZee2 –
That depends on the application. Some will mount to the body mounts and some to the body. You view installation instructions by part number. That will help you on a specific vehicle.
AdminDeeZee2 –
Yes. Contact customer service. 800-779-2102.
AdminDeeZee2 –
Yes. Contact customer service for further assistance. 800-779-2102.
AdminDeeZee2 –
Contact customer service for assistance on replacement step pads. 800-779-2102.
AdminDeeZee2 –
Contact customer service for assistance. 800-779-2102.
AdminDeeZee2 –
We do offer universal 4″ in silver and black. We offer a 48″ and 68″ depending on the cab length.
AdminDeeZee2 –
It won’t work to the frame. The length of the tube where it mounts is not long enough for that type of installment. The only option would be to look at the 3″ universal with mounts to the frame.
AdminDeeZee2 –
Yes. You can contact customer service on how to order replacements. 800-779-2102.
AdminDeeZee2 –
Drop is approximately 2 1/2″ below the rocker panel.
AdminDeeZee2 –
We do not have that type of measurement. There is a lot of variables in that type of measurement.
AdminDeeZee2 –
Our 3″ and 4″ bars are not made in the US. 95% of our product are produced in the US.
AdminDeeZee2 –
The tubes will curve in at the rear of the cab. There is no step pad at the corner to be allow you to reach into the bed.
AdminDeeZee2 –
You can contact customer service and they can order a replacement step pad. 800-779-2102.
AdminDeeZee2 –
Contact customer service and they will be able to assist you. 800-779-2102.
AdminDeeZee2 –
Yes. The 3″ and 4″ tubes will fit with the def tanks.
AdminDeeZee2 –
Please call customer service at 800-779-2102 for assistance on replacement step pads.
AdminJeff De Vries –
We do not have any tube steps that will cover the cab and box. All ours will be cab length only.
AdminDeeZee –
Yes. Contact customer service to order the replacements by MC or Visa as they are not available on the website. 1-800-779-2102